European Trucks & Buses
Location:Home > European Trucks & Buses

Volvo Manual Window Regulator 3176539

To Replace:
Volvo
For Vehicle:

FH16 FM II FM10 FM12 

FM7 FM9 FMX Dump Truck  LH

Part No.:

3176539

3981921

3176537

Tinzer No.
1B-L Manual Regulator Only
  • Introduction
  • factory
3176539 Technical Information
  • Product Name: Heavy Duty Truck Manual Window Regulator (Crank Type).

  • Operating SideLeft Hand (Driver Side / LH).

  • Mechanism Type: High-tension cable-drive system optimized for manual crank operation.

  • Material: High-strength cold-rolled steel frame with advanced zinc-plating for maximum corrosion resistance.

  • Internal Gear: Precision-machined steel manual drive gear with high-torque ratio to ensure smooth and effortless cranking.

  • Cable Specs: Aircraft-grade stainless steel cables with a protective polymer jacket to prevent fraying and moisture damage.

Applications
The 3176539 is primarily engineered for the robust cabins of Volvo and Mack trucks, often preferred in vocational or heavy-duty construction models:
  • Volvo VNL / VNM / VHD / VT Series: 2004–2017+ models (Manual version).

  • Mack Granite / Vision / Pinnacle (CHU / CXU): Models utilizing the shared Volvo cabin architecture.

Interchange & Cross-Reference Numbers
This manual regulator is a direct 1:1 replacement for the following part numbers:
  • Volvo (OE): 3176539, 20450505 (Manual variant), 85101344 (Manual variant).

  • Automann: 174.450505M.

  • Opposite Side (RH)3176540 (Passenger Side).

TinzerMotor: High Quality & Professional Testing
  1. Mechanical Precision: Unlike low-cost alternatives, TinzerMotor utilizes hardened steel gears and precision-molded pulleys. This prevents the "slipping" or "stiffness" often found in manual regulators after prolonged use.

  2. Rigorous Performance Testing:

    • Manual Life-Cycle Test: Every design is subjected to over 40,000 full-range cycles to ensure the internal spring and cable tensioners remain perfectly calibrated over the vehicle's lifespan.

    • Extreme Climate Test: Components are tested in temperature chambers from -45°C to +85°C, ensuring the lubrication doesn't freeze in winter or leak in summer heat.

    • Salt Spray Protection: The galvanized frame passes a 120-hour Salt Spray Test, making it highly resistant to the road salt and high humidity typical of heavy-duty truck routes.

  3. Smooth-Crank Engineering: By utilizing high-quality synthetic lubricants and low-friction rollers, TinzerMotor ensures a "Silk-Smooth" experience, requiring minimal physical effort to lift or lower the heavy truck glass.

  4. Heavy-Duty Fitment: 1:1 precision mapping ensures all mounting studs and the crank handle spline align perfectly with the original Volvo/Mack door specs, guaranteeing a hassle-free installation.


Please contact: 

Ms Riva  

Wechat/WhatsApp +86 15355970956 

Email: riva@ruishuoautoparts.com


Copyright @ Wenzhou Ruishuo Auto Parts Co., Ltd. All Rights Reserved Sitemap