European Trucks & Buses
Location:Home > European Trucks & Buses

Volvo Manual Window Regulator 3176540

To Replace:
Volvo
For Vehicle:

FH16 FM II FM10 FM12 

FM7 FM9 FMX Dump Truck  RH

Part No.:

3176540

3981922

3176538  

Tinzer No.
1B-R Manual Regulator Only
  • Introduction
  • factory
3176540 Technical Information
  • Product Name: Heavy Duty Truck Manual Window Regulator (Crank Type).

  • Operating SideRight Hand (Passenger Side / RH).

  • Mechanism Type: High-tension cable-drive system optimized for manual crank operation.

  • Material: High-strength cold-rolled steel frame with advanced zinc-plating for maximum corrosion resistance.

  • Internal Gear: Precision-machined steel manual drive gear with a high-torque ratio to ensure smooth and effortless cranking.

  • Cable Specs: Aircraft-grade stainless steel cables with a protective polymer jacket to prevent fraying and moisture damage.


Applications
The 3176540 is primarily engineered for the robust cabins of Volvo and Mack trucks, often preferred in vocational, fleet, or heavy-duty construction models:
  • Volvo VNL / VNM / VHD / VT Series: 2004–2017+ models (Manual version).

  • Mack Granite / Vision / Pinnacle (CHU / CXU): Models utilizing the shared Volvo cabin architecture.

Interchange & Cross-Reference Numbers
This manual regulator is a direct 1:1 replacement for the following part numbers:
  • Volvo (OE): 3176540, 20450506 (Manual variant), 85101345 (Manual variant).

  • Automann: 174.450506M.

  • Opposite Side (LH)3176539 (Driver Side).

TinzerMotor: High Quality & Professional Testing
  1. Mechanical Precision: Unlike low-cost alternatives, TinzerMotor utilizes hardened steel gears and precision-molded pulleys. This prevents the "slipping" or "stiffness" often found in manual regulators after prolonged use.

  2. Rigorous Performance Testing:

    • Manual Life-Cycle Test: Every design is subjected to over 40,000 full-range cycles to ensure the internal spring and cable tensioners remain perfectly calibrated over the vehicle's lifespan.

    • Extreme Climate Test: Components are tested in temperature chambers from -45°C to +85°C, ensuring the lubrication doesn't freeze in winter or leak in summer heat.

    • Salt Spray Protection: The galvanized frame passes a 120-hour Salt Spray Test, making it highly resistant to the road salt and high humidity typical of heavy-duty truck routes.

  3. Smooth-Crank Engineering: By utilizing high-quality synthetic lubricants and low-friction rollers, TinzerMotor ensures a "Silk-Smooth" experience, requiring minimal physical effort to lift or lower the heavy truck glass.

  4. Heavy-Duty Fitment: 1:1 precision mapping ensures all mounting studs and the crank handle spline align perfectly with the original Volvo/Mack door specs, guaranteeing a hassle-free installation.

Please contact: 

Ms Riva  

Wechat/WhatsApp +86 15355970956 

Email: riva@ruishuoautoparts.com


Copyright @ Wenzhou Ruishuo Auto Parts Co., Ltd. All Rights Reserved Sitemap